New Method of Founding Profile Equations and Pressure Angle Formula to the Cylindrical Cam Mechanism with Slide Roller-Follower

According to existent problems on design and application of the cylindrical cam mechanism with the slide roller-follower, the one correct concept about profile design and pressure angle is presented. Based on this concept, the theoretical profile,practical profile,meshing surface equations and pressure angle formula of the cam mechanism are built up by using opp.rotation analysis and offset surface principle. This method is very simple and clear, and avoids the abstract analysing process in meshing principle. The mathematic models built by this paper can be used to design,manufacture and check this type of cam mechanism correctly, and also create conditions to make deeply meshing property analysis of this mechanism.     

梭锥管混浊流体分离装置倾角优化数值模拟研究

为了研究锥圈倾角和下锥管倾角对梭锥管内水沙分离效果的影响,在数值模拟计算结果与PIV测试结果一致基础之上,建立了5个不同锥圈倾角和7个不同下锥管倾角的梭锥管模型,采用层流方程和简化的多相流Mixture模型通过数值模拟计算了浑水含沙浓度为5kg/m3时各个梭锥管内部的泥沙浓度和速度场,详细对比分析了不同倾角下梭锥管内的速度场和浓度分布特性。结果表明,在上锥管结构尺寸、锥圈间距不变的条件下,锥圈倾角β与下锥管倾角γ相等且等于45°时,梭锥管水沙分离效果最好,在该角度下锥圈上表面泥沙滑动至排沙通道所需要的时间最短,梭锥管水沙分离效率最高。     

Effect of Water Status on Leaf Angle and Leaf Movement in Wheat

Water stress was imposed by watering withholding or application of PEG during the period following ligule emergence of Hag leaves or fifth leaves. Treatment reduced markedly the downward rotation of these youngest fully expanded leaves, and the angle finally reached. Leaf angle changes appear to be sensitive indicators of water shortage in wheat.     

水稻根系分布与叶角关系的研究初报

1983—1984年,通过群体水培、土培试验,在控制水稻根系不同分布空间形状情况下,研究了叶角与根系分布的关系,其结果主要表现如下:1.根系分布较深且多纵向时,叶角较小,叶片趋向于直立;根系分布较浅且少纵向时,叶角较大,叶片趋向于披垂。2.叶角的大小同时受叶片大小的影响,根系分布较浅且少纵向时,较大的叶片更易披垂,叶角更大,     

Cotyledon angle as a predictor of growth rate of cucumber plant

Summary Experiments conducted in the greenhouse and in the field indicated that plants produced from seedlings of Cucumis sativus L. which displayed their cotyledons in an upward position grew faster than plants which displayed their cotyledons in a downward position. Cotyledon angle was not a function of seed size nor seedling weight at 10 days after planting. An increase in plant height, node number, and fresh weight at later growth stages was associated with an upward cotyledon angle and persisted until time of harvest. Anthesis tended to occur later in plants having a downward cotyledon angle. The number of pistillate flowers was greater in plants with an upward cotyledon angle compared to those with a downward cotyledon angle. Differences in yield (fruit number) were not associated with cotyledon angle.Paper No. 5432 of the Journal Series of the North Carolina Agricultural Experiment Station, Raleigh, NC. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Experiment Station of products named, nor criticism of similar ones not mentioned.     

Improvement of durum wheat-plant type,yield potential,and adaptation

Summary Improvement of durum wheat at the International Maize and Wheat Improvement Center (CIMMYT) was achieved by exploiting the variability of the tetraploid species in large numbers of combinations, and multi-location testing of germplasm on a world wide base. High yielding, widely adapted durums with short straw, good fertility, and adequate earliness were selected for distribution to major durum growing countries. Present attempts to improve durum wheat are directed at adjusting agronomic traits such as leaf angle and straw strength, and increasing spike fertility and spike size, thereby reaching higher grain numbers per unit area and higher yield potential. Diversification of the developmental pattern and incorporation of drought tolerance aim at further widening adaptation.     

Inheritance of leaf angle in Triticum aestivum L.

Summary A 6×6 diallel was prepared to study the inheritance of leaf angle in T. aestivum L. Genetic analysis in terms of diallel cross parameters and graphic analysis indicated the control of additive gene effects in the expression of this character. The results of F₁ analysis were supported by the analysis of F₂ data.     

泥石流入汇主河淤积规律的水槽试验研究

以试验为基础,研究了泥石流入汇主河后淤积规律,主要探讨了淤积量及淤积分布问题。通过试验分析认为,泥石流入汇主河后的淤积量基本随流量比的增大而增大,就其淤积速率而言,有先增大后减小的变化规律。淤积量在流量比大约为0.5时出现峰值,在流量比为0.65时出现谷值,淤积量与流量比关系变化曲线以倾斜向上的直线为对称轴,呈倾斜向上的正弦波形。各工况下淤积范围基本不变,但试验中反映出,淤积范围有随交汇角增大而增大的趋势。     

外掺植物纤维对冻融作用下植被混凝土抗剪强度的影响

[目的]研究外掺2种植物纤维对冻融作用下植被混凝土抗剪强度的影响,为植被混凝土生态防护技术在高寒地区的应用提供科学依据。[方法]参考相关标准(GB/T50082-2009)中的慢冻法,采用2因素3水平全面交叉试验开展研究。[结果]未掺植物纤维的植被混凝土,冻融后黏聚力显著减小,内摩擦角变化不明显。掺入植物纤维可使经受5次冻融循环作用后植被混凝土的内摩擦角平均增加5°左右,并且随植物纤维掺量的增加,内摩擦角变化无明显规律,黏聚力则呈先增加后减小的趋势。表明纤维加筋对黏聚力的贡献存在临界掺量。棕纤维掺量对黏聚力的影响比黄麻纤维掺量更为敏感。[结论]外掺植物纤维可有效改善植被混凝土抵抗冻融破坏的能力,棕纤维和黄麻纤维的建议掺入比为0.6%和0.6%,具备推广应用前景。     

基于理想传动比的主动前轮转向控制

针对目前汽车主动前轮转向系统缺少对理想传动比规律研究的问题,建立线性二自由度车辆模型、主动前轮转向系统模型,以及轮胎模型;设计固定横摆角速度增益下的主动前轮转向系统理想传动比规律,提出基于该规律的主动前轮转向附加转角闭环控制策略,并对提出的控制策略进行仿真分析和试验验证。结果表明:基于理想传动比的前轮主动转向附加转角控制策略可有效保证车辆在低速时横摆角速度响应幅值变大,车辆具有较好的操纵性;高速时横摆角速度和质心侧偏角响应的幅值均变小,车辆具有较好的稳定性,有利于车辆获得较为理想的转向品质。研究结果可为主动前轮转向系统的设计与开发提供理论基础。